www.voxamps.com
It may look like a conventional archtop, but Vox’s latest box offers something truly different. Within the Giulietta VGA-3D is a modeling engine that can conjure tones from humbucker and single-coil to acoustic, banjo, sitar, and guitar synthesizer.
The Giulietta is a small, deep archtop that fits comfortably on the lap. Its hollow body has a laminate-maple top, back and sides, with a set nyatoh neck topped with a 12.6″-radius jatoba fretboard dressed with 22 frets, dot markers, and a bone nut. The neck has a C-shaped carve.
In addition to the XLM humbucker in the neck slot, there’s a piezo under the tune-o-matic bridge, which explains the need for a three-way toggle selector. On the top edge you’ll find the control module for the AREOS-D System, which gives the Giulietta its modeling prowess.
The Giulietta’s control module has a tuner along with buttons for power and access to user-saved sounds and effects/drive. The main knob controls models, which are used in tandem with the toggle, allowing three variations for each of the six instrument sounds – 18 in all, plus two banks for six custom settings. There’s even a headphone jack.
The Giulietta will work well in a home studio or certain situations onstage. Its AREOS-D System offers a bevy of tones; the single-coil sounds aren’t going to replace your favorite Strat or Tele, but in a pinch, should do the job. Same for the acoustic and banjo sound, while the sitar will deliver the right accent for “Norwegian Wood” or “Do It Again.” And, its guitar-synth and sustain sounds are piezo-based, so there are no tracking issues.
The Giulietta is a compelling performer with a likable neck and plenty of cool sounds.
This article originally appeared in VG’s April 2024 issue. All copyrights are by the author and Vintage Guitar magazine. Unauthorized replication or use is strictly prohibited.
