Sommatone Roaring 40

Beauty and the Blend
0
Sommatone Roaring 40

Sommatone Roaring 40

There’s an inherent dichotomy when it comes to guitar amplifiers; the more TLC that goes into their construction, the tougher they are. Think about your average mass-produced amp… Then consider the Sommatone Roaring 40.

Built with heaping helpings of TLC by James Somma and Dan Arango, the Roaring 40 employs a heavy-gauge welded aluminum chassis, Mercury Magnetics transformers, stainless-steel hardware, electrolytic capacitors by Sprague and F&T, silver-plated Teflon wire, four JJ EL84 power tubes with O-rings and heavy duty retainers, four JJ 12AX7 preamp tubes (and one more in the rectifier), tubular polypropylene signal capacitors, a U.S.-made Eminence Red Coat 12″ driver and 13-ply birch cabinet.

The top-shelf treatment continues on the amp’s exterior, with a well-executed Tolex application with silver piping accents and a salt-and-pepper grille, along with a minimalist approach to hardware – just a high-quality leather handle and a metal vent; nothing bulky, and no corners.

Aesthetically, the Roaring 40 gives off a definite British vibe, with its top-mounted controls and shallow (9″) cabinet depth. Controls are straightforward; on top are a pair of 1/4″ inputs (High and Low), Volume controls for the Bright and Normal channels, as well as controls for Treble, Middle, Bass, Presence, Master Volume, and power/standby switches. The back panel has Mix and Dwell controls for the reverb circuit, as well as the switchable output selector (20 or 40 watts), speaker impedance selector, fuses, and power cord socket.

The control layout is straightforward and has a couple of unique features, including blendable Volume controls and the uniquely voiced Presence circuit. The blendable Volumes let you use as much of each channel as you want on a single input, and mixing the Bright and Normal controls creates tones ranging from bright and thin to thick and fat with varying degrees of gain.

Sommatone Roaring 40

Playing a guitar with single-coil pickups, and with the master Volume turned up all the way (which takes it out of the circuit), noodling with the tone stack (10 o’clock to 2 o’clock) and the Volume controls (9 to 10) reveals harmonically rich British tones with thick mids, tight, round low-end, and clear high-end. With the Volume controls dimed, the Roaring 40 produces pleasant saturation and overdrive with nice crunch. Blending the Volume controls compensates well when you transition from single-coils to humbuckers; blending more Bright with humbuckers adds chime and a bit of cut, while blending in more Normal adds thickness to single-coil tones.

While the three-band tone stack offers subtle-but-distinct control, the real star here is the Presence knob, which not only adds snap and sizzle when set between 7 and 10, but smooths out the top-end and warms up the overall tone when set between 1 and 4.

The best way to tweak the 40’s output power is by using a combination of the 20-/40-/half-watt output switch and Master Volume. The tone cleans up by simply rolling off the guitar’s Volume control and easing up with the pick.

If the amp gets a bit loud, rolling off the Master Volume does not appreciably degrade the tone – until you get extreme with it. And its reverb lets you dial in everything from a ultra-wet to subtle ambience. The Sommatone Roaring 40 shines for its overdrive tone, circuit design, a versatile set of controls, and top-notch components.



Sommatone Roaring 40
Price: $2,950
Contact: Sommatone, 109 N. Auten Ave., Somerville NJ 08876; phone (908) 704-0041; sommatone.com.



This article originally appeared in VG‘s October 2008 issue. All copyrights are by the author and Vintage Guitar magazine. Unauthorized replication or use is strictly prohibited.



Five Vibe Shoot Out

No posts to display